Garage Door Motor Replacement Cost in Perth
A new opener fitted and programmed is $750–$1,150 in Perth, GST included; repairing the one you have is $250–$480. What moves the figure, worked examples, and when a repair is the better buy.
Quick Answer
Replacing a garage door motor in Perth costs $750–$1,150 including GST, supplied, fitted and programmed with remotes and with the old unit taken away. Repairing the existing opener — a drive gear, capacitor or control board — is $250–$480. Belt-drive, battery-backup and smart units sit at the top of the band, and a roller door takes a different motor from a sectional door. We confirm the exact figure as a fixed quote before any work starts, and there is no call-out fee.
Garage door motor prices in Perth
These are the opener jobs we quote most, with what each covers and what moves it inside its range. The replacement price is the finished job: the motor, the rail or drum fitting, programming, remotes and disposal of the old unit.
| Repair Type | What It Includes | Typical Range | Cost Factors | Best Next Step |
|---|---|---|---|---|
| Motor / opener replacement | New motor, installation, programming and remotes; old unit removed. | $750–$1,150 | Chain, belt or roller-door unit; smart or battery-backup features; door weight. | Tell us the door type and we quote the fitted price. |
| Motor / opener not working (repair) | Fault-finding and repair of the gear, capacitor, limit switches or board. | $250–$480 | Brand and age of the opener; whether parts are still made. | Tell us the opener brand and what it is doing. |
| WiFi / smart control (supply & install) | Wi-Fi smartphone control added to a compatible opener. | $250–$420 | Whether the existing opener is smart-compatible. | Tell us the opener model. |
| Remote (extra / replacement) | Genuine remotes coded to your motor on the visit. | $85 each + $110 to attend & program | How many remotes; one attendance charge however many. | Tell us the motor brand so we bring the right remotes. |
Every price includes GST and is a guide range for the Perth metro area. The exact figure is confirmed as a fixed quote on site before any work starts. The quote itself costs nothing, and we charge no call-out fee.
What moves the price of a garage door motor
Roller door or sectional door
A roller door takes a motor on the drum axle beside the curtain; a sectional or tilt door takes a rail drive on the ceiling. They are different units and are not interchangeable, so the door decides half the quote before a brand is chosen.
The door's weight
A heavy double door or an insulated sectional door needs a stronger opener than a light single roller door. Fitting an under-sized motor is the commonest reason an opener wears out early, so we size it to the door rather than to the price.
Chain, belt or direct drive
A belt drive runs quieter than a chain drive, which matters when the garage sits under a bedroom. Belt units cost more, and the quiet is what you are paying for.
Smart control and battery backup
Opening from your phone, or a door that still works in a blackout, pushes a unit to the top of the range. Both can often be added to a compatible opener later for $250–$420 instead.
What has to come down first
Replacing a like-for-like opener reuses the mounting point and power. Automating a manual door for the first time, or a tilt door that needs new arms and brackets, adds fitting time.
Power at the motor
A rail drive needs a power point within reach of its lead. If there is none, an electrician adds one before we fit, and that is a separate cost we flag at the quote.
Worked examples
Fifteen-year-old sectional opener, board failed, parts gone
Replacement, not repair: a new rail-drive opener fitted and programmed with two remotes, old unit removed. Lands in the lower half of $750–$1,150 for a standard single or double door; the top half if you choose a belt drive with battery backup.
Six-year-old opener that hums but will not move the door
Usually a stripped drive gear or a capacitor, and the opener is young enough to be worth saving. A repair at $250–$480. If the motor itself has burnt out we say so and quote the replacement beside it.
Manual roller door on a 1990s home, owner wants it automatic
A drum-mounted roller-door motor fitted to the existing door, the manual lock removed and the door balanced first. Within $750–$1,150, provided the door is in good order; a tired spring is fixed before any motor goes on.
Opener works, but the family needs three more remotes
No motor work at all: three genuine remotes at $85 each plus one $110 attendance to code them. If the opener is smart-compatible, phone control can be added on the same visit for $250–$420.
Repair the opener or replace it?
The age of the unit and what has failed decide it. A repair at $250–$480 is money well spent on a young opener with a single failed part; it is money wasted on an obsolete one that will fail again next year.
Repair is usually better when
- The opener is under about eight years old and parts are still made for it
- One part has failed — the drive gear, a capacitor, the limit switches or the board
- The door itself is balanced and runs freely by hand, so the motor is not fighting it
- The remotes and safety beams still work and you are happy with how the door runs
Replacement may be better when
- Parts are no longer available for the model, or the motor has burnt out
- It has needed two or three repairs in a couple of years
- You want quiet belt-drive running, phone control or battery backup
- The repair quote is more than half the $750–$1,150 a new opener costs fitted
What Perth Customers Say About Our Pricing
“Excellent work done by Adam and very prompt in installing a new motor to our garage door. Adam headed to our rescue within two hours and did a great job at a very good price. 👌👏”
Daniel Potter · Motor Replacement
“Highly recommended!! Called at 7pm and they fixed my buggered garage motor 12pm the next day!! In as little as 30 minutes. Great and speedy service is what you want! Thanks again guys! 👌”
Tanya Ray · Motor Replacement
“Awesome service and fair prices. Highly recommend these guys.”
Ben Pickering
How we quote a motor job
Tell us the symptom
Humming with no movement, nothing at all, remotes dead, door stopping part-way — each points to a different part, or to the door rather than the motor.
Tell us the opener
The brand and rough age if you know them, and a photo of the unit. That tells us whether parts exist and whether a repair is on the table.
Tell us the door
Roller, sectional or tilt, single or double, insulated or not. That sets the motor type and size, and most of the price.
You get a fixed price on site
The technician checks the door's balance, confirms repair or replacement and gives you one figure, GST included. Work starts only once you agree it; there is no call-out fee.
Related Services
Frequently Asked Questions
A new garage door motor costs $750–$1,150 in Perth, GST included, supplied, fitted and programmed with remotes and with the old unit removed. A basic chain-drive or roller-door unit sits at the lower end; a quiet belt-drive opener with phone control or battery backup sits at the top. The figure is confirmed as a fixed quote on site before any work starts.
Expect the fitted price to be well above the price of a bare motor on a hardware-store shelf, because the job is the fitting as much as the unit: mounting and aligning the rail or drum drive, setting travel limits and force, aligning the safety beams, coding remotes and disposing of the old opener. Our fitted range is $750–$1,150; if a quote comes in far below that, ask what has been left out.
The same $750–$1,150 range applies to automating a manual door, provided the door is in good order. A roller door takes a drum-mounted motor and loses its manual lock; a tilt or sectional door takes a rail drive and may need an arm and brackets fitted. If the door is heavy on its springs we fix that first, because an opener fitted to an unbalanced door wears out early and can be unsafe.
Yes, in most cases. If the door is straight, balanced and runs freely by hand, a new opener goes onto the existing door and nothing else needs touching. We check the balance before fitting, and if the door turns out to be the real problem we tell you rather than sell you a motor it will fight against. Our motor and opener page covers the units we fit.
Up to a point. A repair at $250–$480 is the right call on an opener under about eight years old with one failed part. On an older unit whose parts are drying up, or one that has already been repaired twice, a repair buys months rather than years, and the money is better put towards the $750–$1,150 a new opener costs fitted. Our opener repair page explains what we check first.
Genuine remotes are $85 each, plus one $110 attendance to code them to your motor — the attendance is charged once however many remotes you add. Tell us the brand and model of the opener when you book so we bring compatible remotes. Remote replacement has the detail, including wiping a lost remote from the opener's memory.
Yes. The $750–$1,150 replacement price covers the opener, the remotes that come with it, fitting to your door, setting the travel limits, force and safety beams, programming, and removal of the old unit. The only extra we ever flag separately is an electrician's power point when there is none within reach of the motor.
Ten to fifteen years is a fair expectation for a residential opener, and the door has more say in it than the brand. A motor on a balanced door that runs freely does light work every cycle; one dragging a door with tired springs or gritty tracks works hard from day one and fails sooner. A yearly service that keeps the door balanced is the cheapest way to reach the top of that range.
Get a Clear Quote
Prefer to call? 0466 910 028Stuck door, noisy door,
or time for a new one?
Book a repair visit anywhere in Perth or ask about a replacement door. Either way the quote is free and the price is settled before anyone picks up a tool.