ATAATA Add On Receiver
View part →
The parts that fail inside a garage door opener long before the motor does — logic boards, trolleys, rails and belts, drive gears, safety beams, wall buttons, keypads, emergency releases and battery back-ups for Merlin, ATA and Guardian units.
A dead opener is rarely a dead opener. The usual culprits are the logic board after a lightning storm or power surge, the plastic drive gear after years of a heavy door, and the trolley or belt on a rail unit that has been run out of balance. All three are replaceable without touching the motor.
Safety beams cause more callouts than anything else on this list. If the door reverses immediately after starting to close, or refuses to close at all while the remote still clicks, check the beams first — they are usually just knocked out of alignment or fogged with dust, and the LEDs on each unit will tell you which side has lost sight of the other.
Battery back-ups are worth having in Perth. Storm-season outages leave a powered door shut with the car inside, and the manual release is awkward if the door is on a slope.
If you can tell us the opener model and what it is doing, we can usually identify the failed part before we arrive.
Nine times out of ten it is the safety beams — misaligned, dirty, or with a broken wire. Check that the LED on each beam is steady, not flashing. If the beams are fine, the door's down-force setting or a binding track is the next thing to look at.
Occasionally, but replacement is usually the sensible option. Boards fail from power surges and the damage is rarely confined to one component. Replacing the board is a straightforward swap on most Merlin and Guardian units.
A keyed cable release fitted to the outside of the door so you can disengage the opener and lift the door by hand if there is no power. It is essential on a garage with no other external door.
Tell us your door or opener model and we'll confirm the right part before we come out — anywhere in Perth, no call-out fee.